Panasonic TX-34P800R - User Manual

Power Source AC AUTO 110-240 V, 50/60 Hz
Power Consumption 200 W
Standby condition 5W
Receiving System 21 Systems
Function
Reception of broadcast PAL B, G, H
transmissions and Playback from PAL I
Video Cassette Tape Recorders PAL D, K
SECAM B, G
SECAM D, K
SECAM K1
NTSC M (NTSC 3.58/4.5 MHz)
Playback from special VCR’s NTSC 4.43/5.5 MHz
NTSC 4.43/6.0 MHz
NTSC 4.43/6.5 MHz
NTSC 3.58/5.5 MHz
NTSC 3.58/6.0 MHz
NTSC 3.58/6.5 MHz
SECAM I
Playback from Special Disc Player PAL 60 Hz/5.5 MHz
and Special VCR’s PAL 60 Hz/6.0 MHz
PAL 60 Hz/6.5 MHz
SECAM 60 Hz/5.5 MHz
SECAM 60 Hz/6.0 MHz
SECAM 60 Hz/6.5 MHz
NTSC 50Hz/4.5MHz
Receiving Channels Regular TV
VHF BAND 2-12 PAL/SECAM B, K1
© 2004 Matsushita Electric Industrial Co, Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
TX-34P800R
GP11 Chassis
0-12 PAL B (AUST.)
1-9 PAL B (N.Z.)
1-12 PAL/SECAM D
1-12 NTSC M (JAPAN)
2-13 NTSC M (U.S.A.)
UHF BAND 21-69 PAL G,H,I/SECAM G,K,K1
28-69 PAL B (AUST.)
13-57 PAL D,K
13-62 NTSC M (JAPAN)
14-69 NTSC M (U.S.A.)
CATV S1-S20 (OSCAR)
1-125 (U.S.A. CATV)
C13-C49 (JAPAN)
S21-S41 (HYPER)
Z1-Z37 (CHINA)
5A, 9A (AUST.)
Receiving Stereo System NICAM I, NICAM B/G, NICAM D
A2 (German)
Tuning System Frequency synthesizer
Auto Search Tuning
POSITION : 100 Position
DIRECT : 125 Position
High Voltage 31.0 ± 1.0 kV at zero beam
current
Picture Tube Minimum Viewable Picture tube
measured diagonally : 80 cm
CRT Deflection : 104°
Audio Output 20 W
Colour Television
Specification
Order No. MTV0401326C3

Summary

Safety Precautions

General Guide

Advises on using isolation transformers and handling high voltage equipment safely.

Leakage Current Cold Check

Procedure to check for leakage current with the receiver unplugged.

Leakage Current Hot Check

Procedure to check for leakage current with the receiver plugged in.

X-Radiation

Warning about potential X-radiation sources and testing procedures.

Self Check

Market Mode Function

Adjustment Procedure

Voltage Confirmation

Lists test points and expected voltage values for confirmation.

E.H.T Check

Details the procedure for checking and confirming the EHT voltage.

Sub Contrast

Procedure for adjusting Sub Contrast using a PAL colour bar pattern.

Sub Tint

Procedure for adjusting Sub NTSC Tint using a rainbow pattern.

Sub Colour

Procedure for adjusting Sub Colour using a NTSC rainbow pattern.

Secam Black Level

Procedure for adjusting SECAM B-Y and R-Y OUT for black level.

VRS Adjustment

Step-by-step guide for VRS adjustment, including preparation.

Colour Purity

Procedure for adjusting Colour Purity using a white pattern.

Convergence

Steps for adjusting static convergence using magnets.

Cut Off

Procedure for adjusting Cut Off and Drive levels for RGB signals.

White Balance

Procedure for adjusting White Balance for Low Light and High Light.

Focus

Procedure for adjusting the focus control for sharp picture lines.

Geomagnetic

Procedure for demagnetizing and adjusting geomagnetic correction.

Sub Bright

Procedure for adjusting Sub Bright level using a photo sensor.

Deflection Adjustment

V-Adjustment;Confirmation (4:3 Mode)

Covers V-Hold, V-Center, and V-Height adjustments for 4:3 aspect ratio.

H-Deflection Confirmation;Adjustment (4:3 Mode)

Covers H-Hold, H-Center, and H-Width adjustments for 4:3 aspect ratio.

Pincushion Adjustment;Confirmation (4:3 Mode)

Details pincushion adjustments for 75i, 100i, 50p, and 60p modes in 4:3.

V Liniality Adjstment;Confirmation (4:3 Mode)

Procedure for adjusting V-Linearity for 75i, 100i, 50p, and 60p in 4:3.

Deflection (16:9 Mode) Adjustment;Confirmation

Data setting and adjustments for V-Center, V-Height, V-Linear in 16:9 mode.

Deflection (16:9 Mode) Adjustment;Confirmation

Pincushion adjustments for 100i and 75i modes in 16:9 aspect ratio.

1125 i; 50 Hz Deflection Adjustment;Confirmation

Deflection adjustments for 1125i/50Hz signals, including hold, center, and linearity.

Conductor Views

A BOARD

Layout diagram for the A BOARD, showing component positions.

D BOARD

Layout diagram for the D BOARD (A), detailing component placement.

DG BOARD

Layout diagrams for the DG BOARD (A and B), showing component locations.

Schematic Diagrams

Schematic Diagram for GP11 Chassis

The main schematic diagram for the GP11 chassis.

G Board

Schematic diagrams for the G Board (1/2) and (2/2).

GM Board

Schematic diagrams for the GM Board (1/2) and (2/2).

DF Board

Schematic diagrams for the DF Board (1/2) and (2/2).

H Board

Schematic diagrams for the H Board (1/3), (2/3), and (3/3).

DG Board

Schematic diagrams for the DG Board (1/10) through (7/10).

A Board

Schematic diagrams for the A Board (1/6) through (6/6).

D Board

Schematic diagrams for the D Board (1/3), (2/3), and (3/3).

Parts Location

Replacement Parts List

Replacement Parts List

Detailed list of replacement parts with part numbers and descriptions.

Panasonic TX-34P800R Specifications

General

Brand	Panasonic
Model	TX-34P800R
Category	TV
Language	English