19
7.1.3. Check Point
Confirm the following parts if NG was displayed.
7.1.4. Exit
Disconnect the AC cord from wall outlet or press the [POWER] button on the main unit for 3 seconds to turn off and then turn on
automatically.
DISPLAY Check Ref. No. Description Check Point
H14TUN TU6704 TUNER A-BOARD
H38FRC IC9000 FRC A-BOARD
H07TEMP IC2250 TEMP SENSOR A-BOARD
H17LAN ETHERNET A-BOARD / LAN
H00FE IC6800 DEMODULATOR A-BOARD
H96ID ID A-BOARD
H97ID2 ID2 A-BOARD
H42WiFi WiFi A-BOARD / WiFi
H80HDMISW1 IC4500 HDMI2.0 Rx A-BOARD
To Next Page
Loading...
