Panasonic TX-L32E6Y

- 128 -
●
For DVB mode
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
●
For DVB-C mode
Signal Condition
Checks the signal condition.
Watching Tuning and editing channels Signal Condition
●
Not valid in Analogue mode
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
●
If the DVB-C signal is too strong, the interference may occur. In this case,
set to On to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
●
This function is available if you skip any modes to tune in Auto Setup for
first using the TV.
= Note =
●
The settings in Tuning Menu are applicable only for the selected TV mode.
The menu name varies depending on the TV mode. (DVB-C Tuning Menu
/ DVB-T Tuning Menu / Analogue Tuning Menu)
Language
OSD Language
Changes language for on-screen displays.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).