Panasonic TX-L32E6Y

- 29 -
No signal Power off is set to On.
Settings Timer No signal Power off
Aspect
Change the aspect ratio (image size) with ASPECT.
●
Enjoy viewing the image at its optimum size and aspect. Programmes
usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and
the TV will choose the aspect ratio automatically according to the “Aspect
Control Signal”.
Watching For best picture Auto aspect
■ To change the aspect ratio manually
1. Display Aspect Selection list with ASPECT
2. Select the mode with
/ and press OK to set
●
You can also change the mode pressing ASPECT.
(Press repeatedly until you reach the desired mode.)
●
Programmes usually contain an “Aspect Control Signal” (Widescreen
signal, etc.), and the TV will select the aspect ratio automatically according
to the “Aspect Control Signal”.
Watching For best picture Auto aspect
Auto:
Watching For best picture Auto aspect
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
4:3 Full:
Displays a 4:3 image enlarged horizontally to fit the screen.
●
For HD (High definition) signals
Sidecut Just: