- 53 -
Channel List
■ Skip unwanted DVB / Analogue channels
You can hide (skip) unwanted channels. The hidden channels cannot be
displayed except in this function.
1. Select Channel List with
/ and press OK to access
2. Select a channel with
/
3. Press OK to set Reveal / Hide (skip)
: Reveal
: Hide (skip)
●
To reveal all channels (DVB / Analogue)
(yellow)
■ Edit DVB / Analogue Channels
●
To swap the channel position number (logical channel number)
1) Press
(green) to edit
2) Enter the new position number with numeric buttons, and press
(green) to store
●
To retune each channel (Manual Tuning)
(red)
– Only for the revealed channels
●
To rename the channel name (Analogue)
1) Press
(blue) to edit
2) Enter characters (maximum 5 characters) with
/ / / or
numeric buttons, and press OK to set
3) Press BACK/RETURN to store
= Note =
●
If a VCR is connected only with the RF cable in Analogue mode, edit VCR.
To Next Page
Loading...
