- 40 -
When in True Cinema, Custom or Professional1 / 2 mode, Advanced Settings
can be adjusted additionally. The settings in True Cinema, Custom or
Professional1 / 2 mode can be stored for each input.
●
You can set Viewing Mode in 2D and 3D mode for each.
Ambient Sensor
1. Display the menu with MENU
2. Select Picture
Ambient Sensor with / and press OK to access
3. Select On / Off with
/ and press OK to set
Ambient Sensor
(On / Off)
●
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting
conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●
Off Timer is active.
Watching Basic Off Timer
●
No operation is performed for 4 hours while Auto Standby is set to On.
Settings Timer Auto Standby
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
Settings Timer No signal Power off
= Note =
●
This function does not affect the recording of Timer Programming and One
Touch Recording.
To Next Page
Loading...
