Need help?Do you have a question about the Panasonic TX-PF42G30 and is the answer not in the manual?
General guidelines for conducting repairs and servicing safely.
Procedure for measuring touch currents to ensure safety.
Techniques to prevent component damage from static electricity.
Information on lead-free solder usage, melting points, and handling.
Diagram showing the layout of PCBs and component identification.
Lists applicable input signals for component and HDMI inputs.
Details about key specifications for digital content protection.
Information on recording TV programs using a USB HDD.
Instructions for accessing and navigating the service mode menu.
Lists adjustable parameters within the service mode.
Settings for picture reversal (left/right, up/down).
Accessing and using the service tool mode.
Configuration options for hotel mode restrictions.
Procedures for copying data using an SD card for replacement or hotel setup.
Steps to copy TV data to an SD card.
Steps to copy data from an SD card to the TV set.
Guide to checking IIC bus lines for troubleshooting.
Chart for interpreting power LED blinking codes for troubleshooting.
Troubleshooting steps for the 'no power' condition.
Troubleshooting flowchart for 'no picture' issues.
Identifying PCBs responsible for local screen failure symptoms.
Instructions for removing the rear cover.
Procedure to safely remove the AC inlet connector and assembly.
Step-by-step guide to removing the Power Supply board (P-Board).
Instructions for removing the side terminal cover.
Steps for disassembling and removing the tuner unit.
Procedure for removing the Main AV input/processing board (A-Board).
Instructions for removing the side unit assembly.
Steps to remove the left and right speakers.
Procedure for removing the Scan Drive board (SN-Board).
Steps for removing the Sustain Drive board (SS-Board).
Instructions for removing the cooling fan.
Procedure for removing the pedestal stand bracket.
Steps to remove the C1-Board (Data Driver Lower Right).
Steps to remove the C2-Board (Data Driver Lower Left).
Removing chassis support structures and M8 nuts.
Procedure for removing the bottom contact metal B.
Steps to carefully detach the plasma panel from the cabinet.
Instructions for removing various contact metal parts.
Procedure for removing the K-Board (Remote receiver).
Cautionary notes and steps for replacing the plasma panel.
General section for measurements and adjustments.
Procedure for adjusting sub-contrast for RF, AV, and HD systems.
Method for adjusting white balance according to PEAKS EEPROM version.
Overall block diagram of the TV's main functions and interconnections.
Detailed block diagram section 1 of 4.
Detailed block diagram section 2 of 4.
Detailed block diagram section 3 of 4.
Detailed block diagram section 4 of 4.
Important cautions regarding cable assembly and connection.
Diagram showing wiring connections for specific components.
Diagram illustrating further wiring connections.
Diagram showing wiring connections for specific components.
Diagram illustrating additional wiring connections.
General guidelines for conducting repairs and servicing safely.
Procedure for measuring touch currents to ensure safety.
Techniques to prevent component damage from static electricity.
Information on lead-free solder usage, melting points, and handling.
Diagram showing the layout of PCBs and component identification.
Lists applicable input signals for component and HDMI inputs.
Details about key specifications for digital content protection.
Information on recording TV programs using a USB HDD.
Instructions for accessing and navigating the service mode menu.
Lists adjustable parameters within the service mode.
Settings for picture reversal (left/right, up/down).
Accessing and using the service tool mode.
Configuration options for hotel mode restrictions.
Procedures for copying data using an SD card for replacement or hotel setup.
Steps to copy TV data to an SD card.
Steps to copy data from an SD card to the TV set.
Guide to checking IIC bus lines for troubleshooting.
Chart for interpreting power LED blinking codes for troubleshooting.
Troubleshooting steps for the 'no power' condition.
Troubleshooting flowchart for 'no picture' issues.
Identifying PCBs responsible for local screen failure symptoms.
Instructions for removing the rear cover.
Procedure to safely remove the AC inlet connector and assembly.
Step-by-step guide to removing the Power Supply board (P-Board).
Instructions for removing the side terminal cover.
Steps for disassembling and removing the tuner unit.
Procedure for removing the Main AV input/processing board (A-Board).
Instructions for removing the side unit assembly.
Steps to remove the left and right speakers.
Procedure for removing the Scan Drive board (SN-Board).
Steps for removing the Sustain Drive board (SS-Board).
Instructions for removing the cooling fan.
Procedure for removing the pedestal stand bracket.
Steps to remove the C1-Board (Data Driver Lower Right).
Steps to remove the C2-Board (Data Driver Lower Left).
Removing chassis support structures and M8 nuts.
Procedure for removing the bottom contact metal B.
Steps to carefully detach the plasma panel from the cabinet.
Instructions for removing various contact metal parts.
Procedure for removing the K-Board (Remote receiver).
Cautionary notes and steps for replacing the plasma panel.
General section for measurements and adjustments.
Procedure for adjusting sub-contrast for RF, AV, and HD systems.
Method for adjusting white balance according to PEAKS EEPROM version.
Overall block diagram of the TV's main functions and interconnections.
Detailed block diagram section 1 of 4.
Detailed block diagram section 2 of 4.
Detailed block diagram section 3 of 4.
Detailed block diagram section 4 of 4.
Important cautions regarding cable assembly and connection.
Diagram showing wiring connections for specific components.
Diagram illustrating further wiring connections.
Diagram showing wiring connections for specific components.
Diagram illustrating additional wiring connections.
General| 3D | No |
|---|---|
| AV 1 | AV In/Out, RGB In, Q-Link |
| AV 2 | CVBS x 1 |
| Depth | 70 mm |
| Width | 1020 mm |
| Height | 640 mm |
| Weight | 20500 g |
| Tuner type | Analog |
| 24p support | Yes |
| Color depth | 12 bit |
| Pixel pitch | - mm |
| Smart modes | Cinema, Dynamic, Game, Photo |
| Audio system | Dolby Digital Plus/DolbyPulse |
| Product color | Black |
| Response time | 0.001 ms |
| Playback modes | Normal |
| RMS rated power | 20 W |
| AC input voltage | 220 - 240 V |
| Display diagonal | 42 \ |
| AC input frequency | 50 - 60 Hz |
| Depth (with stand) | 320 mm |
| Display brightness | - cd/m² |
| Display technology | Plasma |
| Number of speakers | 2 |
| HDMI ports quantity | 4 |
| Height (with stand) | 675 mm |
| High frequency rate | 600 Hz |
| Weight (with stand) | 24000 g |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| USB 2.0 ports quantity | 3 |
| Audio formats supported | AAC, MP3, WMA |
| S-Video inputs quantity | 0 |
| Video formats supported | AVCHD, DIVX, H.264, MKV, MP4, WMV |
| Analog signal format system | PAL, SECAM |
| Power consumption (average) | 122 W |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 275 W |
| Digital signal format system | DVB-C, DVB-T |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Component video (YPbPr/YCbCr) in | 1 |
| On Screen Display (OSD) languages | ENG, ESP, GRE, ITA |
To Next Page