Panasonic TX32LX80 - Technical Troubleshooting Guide

Snowy Picture
1 01
i
N oisy Sound
Aerial location, direction or connection
® Multiple Image
i
<_.P
Normal
Sound Aerial. location, direction or c onnections
_
_
I nterference
A
N oisy Sound
E lectrical appliances
C ars, motorcycles
Fluorescent fights
N ormal
Picture No Sound
Volume level
S d t it h doun mu e sw c e on.
Is the unit in "AV mode"?, Is the mains lead
No Picture - No Sound
plugged
into the socket outlet?,
Is the TV unit
,
turned On?
Check Picture menu and volume.
No Colour ®
_11
Normal Sound
Colour Control set at minimum levels.
C l o our system
Poor or Distorted
P icture
` V
W
eak o r N o sound Retune Channel(s).
N ormal Picture ®
A X 11"
Weak or Distorted
d
Sound reception may have deteriorated.
S d t soun oun sys em.
T his is a characteristic of liquid crystal panels
and is not a problem. The liquid crystal panel
T here may be red spots,
_1
is built with very high precision technology
g iving you fine picture details. Occasionally, a
blue spots, green spots and
black spots on the screen
_ _ Normal sound
\ few non-active pixels may appear on the screen
as fixed points of red, blue, green or black.
P lease note this does not affect the
performance of your LCD.
Switch the TV unit on again with the equipment
" VIERA Link" function does not work
Set "VIERA Link" to "Off", then set to "On"
a gain.
HDMI cable is not connected securely. Turn
OFF the power supply of the TV and connected
Poor V ideo
equipment OFF then turn on again.
H
p
.
(Snow noise, no
picture, picture runs, etc.)
Check compatibility of input signal from
the connected equipment. The connected
M equipment must be EIA/CEA-861/861 B
I compliant.
C hange the audio setting of the connected
equipment to L.PCM
PoorAudio
Check the "HDMI1 input" setting in the Sound
menu.
I f digital sound connected has a problem, select
a nalogue sound ( DVI) c onnected.
T he error message appears. Please consult an Authorized
Service Center.
29
T X-37LX80A_0022_EN.Indd 29
#
3/7108 8:24:15 AM