- 21 -
Reference
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select “Setup”.
3
Select “Player Settings”.
OK
RETURN
Player Settings
System
Ratings
Network
Language
3D
Audio
Video
Resolution
Auto
4K60p Output
Off
24p Output
Auto
HDR10+ Setting
On
Advanced Settings
4
Select an item and change the settings.
To exit the screen
Press [HOME].
Video
Resolution
The items supported by the connected devices
are indicated on the screen as “
∗
”. When any
item without “
∗
” is selected, the images may be
distorted.
y
If “Auto”
*
1
is selected, the best suited output
resolution to the connected TV is automatically
selected.
4K60p Output
This unit automatically chooses to output
images in 4K
*
2
/60p when connected to a 4K/60p
compatible TV.
y
This item is available only when “Resolution” is
set to “Auto” and “4K”.
y
To connect to a TV that supports 4K/60p
(4:4:4/8 bit) or 4K/60p (4:2:2/12 bit), select
“4K/60p(4:4:4)”.
Images will not be output correctly with an HDMI
cable that does not support 18 Gbps.
y
To connect to a TV that supports 4K/60p (4:2:0/8
bit), select “4K/60p(4:2:0)”.
24p Output
Content recorded at 24p
*
3
, such as BD-Video
lms, is output at 24p when played back.
y
When this unit is connected to TV compatible
with 4K/24p and “Resolution” is set to “Auto” or
“4K”, images will be output in 4K/24p.
y
When this unit is connected to a TV compatible
with 1080/24p and “Resolution” is set to “Auto”,
“1080i” or “1080p”, images will be output in
1080/24p.
y
If images output in 24p are distorted, change
the setting to “O”.
HDR10+ Setting
You can set enable/disable of the HDR10+
function.
By changing this setting to “On”, you can use the
HDR10+ function under the following conditions:
– A device (TV, etc.) that supports HDR10+ is
connected (
10).
– A disc that supports HDR10+ is played back.
y
The “Video Settings” setting is disabled while
using the HDR10+ function. (
20)
Advanced Settings
Press [OK] to show the following settings:
Color Mode
This setting is for selecting color-space
conversion of the image signal.
Deep Color Output
Set the output method to be used when this unit
is connected to a TV that supports Deep Color.
HDR/Color Gamut Output
Set the output type for HDR (High Dynamic
Range) material.
25p/50p Output
Set whether to output 25p/50p/50i material
on Ultra HD Blu-ray/Blu-ray discs as 25p/50p
material when a TV that supports 25p/50p is
connected.
y
If you select “O”, the output frame rate will be
converted to 30p/60p.
Reference
To Next Page
Loading...
Need help?
General
