Panasonic VDR-D150GN - Un-Finalizing a DVD-RW

Disc and card management
Finalizing a disc
84
LSQT1052
(-RW‹V›)
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ UN-FINALIZE] # [YES] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
≥ When un-finalizing is complete, press the MENU button to exit the message screen.
≥ When you un-finalize the disc, use a battery with
sufficient battery power or the AC adaptor.
≥ DVD-RW (VR format) cannot be un-finalized. DVD-
RW (VR format) after finalization can be recorded
and edited in the same way as DVD-RW (VR
format) before finalization.
≥ DVD-R cannot be un-finalized.
Un-finalizing a DVD-RW
This is for un-finalizing a DVD-RW (Video format) so that it can be used for
recording.
LSQT1052(ENG).book 84 ページ ２００５年１２月２１日 水曜日 午後６時５０分