5
LSQT1200
¬Installing software
When installing the software, log on to your computer as the Administrator or with a user name with
equivalent authorization. (If you do not have authorization to do this, consult your manager.)
1 Insert the CD-ROM into the computer.
The introduction movie starts.
Click [To continue the installation] at the end of the introduction movie and then
the [Setup Menu] screen will appear.
≥ If the introduction movie screen does not appear, double-click the CD-ROM
drive icon in [My Computer].
2 Click the software to be installed.
≥ Install DVD-RAM Driver and then install DVD-MovieAlbumSE or DVDfunSTUDIO.
3 Follow the on-screen messages to install it.
≥ When installing DVD-MovieAlbumSE or DVDfunSTUDIO:
Select [NTSC (North America)] for the TV system.
¬Creating a DVD-Video disc on a computer
Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/DVD-R
disc) from the motion pictures recorded on this unit.
≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
≥ When using DVD-MovieAlbumSE or DVDfunSTUDIO, log on to your computer as Administrator with
a login name equally authorized. If you log on with a login name other than Administrator, you cannot
use the applications.
≥ When using DVD-MovieAlbumSE or DVDfunSTUDIO, close any other software applications.
≥ Connect this unit to the AC adaptor.
1 Insert a DVD-RAM or DVD-RW (VR format) with recorded images in the
unit, then
turn on the unit.
Burn
Export
DVD-MovieAlbumSE
DVDfunSTUDIO
Edit the scenes. Edit the DVD menu.
DVD-Video
QSG_ENG.fm 5 ページ ２００６年１１月２０日 月曜日 午後４時２６分
To Next Page
Loading...
