6
LSQT1200
2 Connect this unit and a computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit and
computer will not operate properly if the plugs are
not inserted fully.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with
any other USB cables.)
The USB function selection screen will appear.
3 Select [PC CONNECT(DISC)] and press the joystick.
4 (On the computer)
Select [start] # [All Programs (Programs)] #
[Panasonic] # [DVD camcorders] # [DVD
camcorders], then click [DVD-MovieAlbum].
≥ If the screen showing a brief explanation of the application is displayed,
close it.
DVD-MovieAlbumSE starts and the images recorded on the disc are
displayed.
5 (When using a DVD-RAM only)
Edit the images on the disc as required.
6 Click [Export].
When starting DVD-MovieAlbumSE, the [Mount Information] dialog box may appear or the
recorded images may not be shown. If this occurs, try the following procedure. If there are
multiple drives, a drive other than this unit may be selected.
1) Click [Preference] on the dialog box or ([Preference]) button at top right of
DVD-MovieAlbumSE screen, and then click the [Device setting] tab.
2) Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].
A
QSG_ENG.fm 6 ページ ２００６年１１月２０日 月曜日 午後４時２６分
To Next Page
Loading...
