7
LSQT1200
7 Set the export settings in the [Export all titles] screen and
click [Start].
≥ It is recommended that you do not change the settings displayed on the screen.
8 When export is complete, a message will appear. Check
the small box for [Eject the disc being used.], and then
click [Yes].
DVD-MovieAlbumSE automatically closes and DVDfunSTUDIO
automatically starts.
9 Insert a brand-new DVD-RW or DVD-R disc into the unit.
10
When the [CollectTool] screen appears, click [OK].
The exported scene will be automatically registered on the DVDfunSTUDIO
editing screen.
11
Edit the DVD menu as required.
≥ Set the disc size to [8cm DVD] or [8cm DVD DL].
≥ Select the desired destination drive to write to if necessary.
12
Click [Burning].
Writing to the disc starts.
When writing is complete, the disc is ejected automatically.
QSG_ENG.fm 7 ページ ２００６年１１月２０日 月曜日 午後４時２６分
To Next Page
Loading...
