83
LSQT1328
Using
software
1
Starting VideoCam Suite
For Windows Vista:
≥ When using VideoCam Suite, log on to your PC as Administrator (or with a login name equally
authorized) or with the user name for a standard user account. If you log on with a user name for a
guest user account, the software cannot be used.
For Windows XP/2000:
≥ When using VideoCam Suite, log on to your PC as Administrator (or with a login name equally
authorized). If you log on with a login name other than Administrator, the software cannot be used.
Select [start] # [All Programs (Programs)] # [Panasonic] # [VideoCam
Suite 1.0] # [VideoCam Suite].
Refer to the operating instructions of the software (PDF file) for details on how to use it.
≥ If the unit is connected to a PC when the USB function is set to [PC CONNECT(DISC)], this unit is
only capable of reading data. It is impossible to select this unit as the destination for outputting data
when VideoCam Suite is used.
≥ You will need Adobe Reader to read the PDF
operating instructions. (l 74)
Select [start] #
[All Programs (Programs)] #
[Panasonic] # [VideoCam Suite 1.0]
# [Manual].
Take care that the temperature of the unit, when connected to a PC, does not rise excessively
(reference for usage: approx. 30 minutes at about 30 °C).
Reading the operating
instructions of the software
VDR-D50EP-LSQT1328_eng.book 83 ページ ２００８年２月２０日 水曜日 午後３時５５分
To Next Page
Loading...
