If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable,
you will find it easier to use. Please refer to p. 30-35. Before using these functions, you need to
set "VIERA Link" setting to "On" as shown below.
_ Display the menu
Select "Setup"
Select "VIERA Link settings"
_select
Select "VIERA Link"
• Press to exit from
a menu screen Select "On"
EXIT
(default is On)
• Press to return to
the previous screen
RETURN
@
Now you can set each "VIERA Link" function according to your preference
(p. 32-35).
® If no HDMI equipment is connected or standard HDMI equipment (non- "VIERA
Link") is used, set it to "Off".
® For more details on the external equipment's connections, pleaserefer to the
operating manualsfor the equipment.
@
('3
CT
(Q
<
{3-
CD
0
O3
E3
<
25
To Next Page
Loading...
