Input Labels
Display
the menu
Select "Setup"
• Press to exit from
a menu screen
EXIT
Select "Input labels"
@
__@
o
CD-_
CL C
Devices connected to external input terminals can be labeled for easier identification during the
input selection. (In selecting the input mode from p. 24 @)
• Select the terminal and label of the external equipment
or
Terminal
[example]
Follow the instructions on screen to
complete the following operations.
® Terminals: HDMI 1-3/Component/Video 1-2/PC
® Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME
THTRIGAMEICOMPUTERIVCRICABLEISATELLITE!
DVR/CAM ERA/MONITOR/AUX/RECEIVER/M EDIA
CTR/M EDIA EXT!OTH E R
For the PC terminal, only "Not used" is available.
® If "Not used" is selected, the INPUT button press will skip its
input.
® Each selected label will be displayed on the "Input select"
41
To Next Page
Loading...
