(Continued)
• Menu list
Item Adjustments/Configurations (alternatives)
Sets the mode to select the channel with the Channel up/down button.
Channel surf mode (All/Favorite/Digital only/Analog only)
Favorite: Only channels registered as FAVORITE. (p. 16)
Language Selects the screen menu language.
Clock Adjusts the clock. (p. 14)
ANT/Cable setup Sets channels. (p. 13)
Input labels Selects the terminal and label of the external equipment. (p. 41 )
Controls the equipment connected to HDMI terminals (Off/On) (p. 32)
VlERA Link _ "Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
I _ Power on link Sets "Power on link" of the HDMI connected equipment (No/yes) (p. 32)
r- Power off link Sets "Power off link" of the HDMI connected equipment (No/Yes) (p. 32)
5_ Energy saving Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 32)
mode
, Unselected Sets "Unselected device save" of the HDMI connected
energy
equipment. (p. 32)
device energy (No (stay on)/Yes (with prompt)/Yes (no prompt))
save
Default speakers Selects the default speakers (TV/Theater) (p. 32)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
Power save room. (Standard/Saving)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or
"Digital Channel" is selected.
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by "No signal for 10
minutes".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
÷ Not in use when "Auto power on" or "On/Off Timer" is set, or while "PC input" is selected.
"No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Turns TV On automatically when the cable box or a connected device is turned On (No/yes)
TVAC cord must be plugged into this device. TV comes on every time the power is restored.
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 42)
Set "Thumbnail" or "Slideshow" to play back SD cards automatically.
Slideshow/Thumbnail/Set later/Off)
Restart first time setup from "Language" setting. (p. 12)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings.
No signal for 10
_ minutes
_3
<
No activity for 3
hours
_ Auto power on
r--._
Image viewer
auto play
First time setup
About
Reset to defaults
• Sub menu list
Menu Item i Adjustments/Configurations(alternatives)
Sets the mode to select the channel with Channel up/down button.
Channel surf mode (All/Favorite/Digital only/Analog only)
Set favorite Sets favorite channels. (p. 16)
Edit CH caption Changes the station identifier.(p. 39)
Signal meter Checks the signal strength if interference or freezing occurs on a digital image.
@
A-r"
'oo
-.3
c)..
t-
_) -13
_--:t-
v00
29
To Next Page
Loading...
