10
Installing the remote’s batteries
Pull
open
Hook
Note the correct polarity
(+ or -).
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as
alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or break batteries.
Power cord connection
•
When disconnecting the power cord, be absolutely
sure to disconnect the power cord plug from the wall
outlet first.
•
The included power cord is for use with this unit only.
Insert the power cord plug (included) firmly into place.
TC-L32_37_42_47E5_EN.indb 10TC-L32_37_42_47E5_EN.indb 10 4/23/2012 11:27:43 AM4/23/2012 11:27:43 AM
To Next Page
Loading...
