Watching Vi
eos an s
If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen.
You can select the external equipment to access.
With the connected equipment turned On
Display the Input select menu
INPUT
Select the input mode
or
(example)
Press the corresponding NUMBER
button on the remote control to
select the input of your choice.
Select the input of your choice, then
press OK.
® During the selection, if no action
is taken for several seconds, the
"input select" menu disappears.
[] To return to TV
INPUT
Terminal
Label
t
(example)
® The terminal and label of the
connected equipment are
displayed.
To label each of the inputs,
please refer to p. 53.
® The Input label will be displayed on the "input select" screen if the Input label is set
on p. 53.
® For side input terminals (HDMI 3/Video 2), "GAME" Input label is set as default.
(Picture mode is set to "Game", refer to p. 59.)
® For more details on the Picture mode setting, refer to p. 59. For "input labels", refer
to p. 53.
[] Press GAME to switch to the game screen
Switches to input terminal that has "GAME" label.
GAME ® Cycle through the input terminals if there are
multiple input terminals that have "GAME"
label. (p. 53)
_ if there is no input terminal with "GAME"
label, you cannot switch the input terminal
to any other input terminal than the one
currently selected.
l
1
Operate the connected equipment using the remote
control supplied with the equipment
® For details, see the manual for the connected equipment.
If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable,
you will find it easier to use. Please refer to p. 38-43. Before using these functions, you need to
set "VIERA Link" setting to "On" as shown below.
Display the menu
S
Select "Setup"
Select "VIERA Link settings"
Select "VlERA Link"
[] Press to exit from
a menu screen
EXiT
Select "011"
(default is On)
[] Press to return to
the previous screen
RETURN
Now you can set each "VIERA Link" function according to your preference
(p. 40-43).
® if no HDMi equipment is connected or standard HDMi equipment (non- "ViERA
Link") is used, set it to "Off".
® For more details on the external equipment's connections, please refer to the
operating manuals for the equipment.
®
o
:3"
<
CD
0
O_
C_
CJ
32 33
To Next Page
Loading...
