11
Viewing
HDMI
HDMI
TV
VCR DVD
REC
TV/AV
OK
1 2 3
4 5 6
7 8 9
0
•
Watching Videos and DVDs
•
Watching TV
Watching Videos and DVDs
With the equipment turned On
Select the external input
1
It is possible to connect a variety of external equipment to the TV unit. Once the equipment is connected,
use the following procedure to view the input. To connect the equipment (p. 22)
TV/AV
Select the connector connected to the equipment
(AV mode screen)
Note
•
If the external
equipment has an
aspect adjustment
function, set to
"16:9".
•
For details, see
the manual of the
equipment or ask
your local dealer.
■
To return to TV
TV/AV
•
example: AV1
red
Displays the selected connector
Some Panasonic VCR and DVD equipment connected to the TV unit can be
directly operated with the remote control.
•
After setting, execute operation confi rmation. If there is no operation, set a
different code.
•
The respective VCR / DVD code is cancelled when battery has been
exchanged. Set it again.
•
Depending on the model, operation may not be possible.
•
In some cases, new products may not be operative.
2
Rewind / Slow-motion / Search
VCR: Rewind, review (during playback)
DVD: Play at slow speed
Press and hold to search backward
Fast-forward / Slow-motion / Search
VCR: Fast-forward, cue (during playback)
DVD: Play at slow speed
Press and hold to search forward
Pause
Pause / Restart
Programme Up, Down / Skip
VCR: Select programme
DVD: Skip the track or title
REC
Record
Start recording
VCR DVD
VCR / DVD switch
Select VCR / DVD
Standby
Set to Standby mode / Turn on
Play
Playback VCR / DVD
Stop
Stop the operations
red
AV1
green
AV2
yellow
AV3
blue
HDMI
■
Remote control setting
VCR DVD
1 2 3
4 5 6
7 8 9
0
VCR
Manufacturer Code
Panasonic / National 10,11,12,13
DVD
Manufacturer Code
Panasonic 70, 71
Switch to select VCR or DVD
Enter the manufacturer code
(two digit code)
Press
Press and hold
while operating
To Next Page
Loading...
