35
DVB Tuning Menu provides access to DVB Tuning features.
In DVB mode
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
Access DVB Setup Menu.
Move to DVB Tuning Menu.
Access DVB Tuning Menu.
Move to menu option
Adjust chosen option or access chosen menu
Press the EXIT button at any time to go back
to watching TV.
Automatically retunes your TV. DVB stations will be located, sorted into order and
stored. DVB tuning data will be erased. If you set the Child Lock PIN number, the
number is required before DVB Auto Setup.
You can add new DVB stations while retaining existing tuning data. When the New
Services Found message appears new DVB stations are available to add to your
existing DVB channel list.
This TV continually scans for updated DVB services and notifies you of any
changes. Set to On to receive notification. Set to Off if you do not wish to be
informed of any updates.
The signal condition function displays indications of both signal quality and signal
strength for each DVB programme position.
The D VB system requires that the signal condition is of good quality to provide the
best picture. When viewing analogue pictures, interference such as signal
reflection from nearby buildings or mountains causes “ghosting“, but still provides
a viewable picture. For the DVB system, interference such as this can disrupt the
flow of data causing the picture to appear to be made up of large blocks, or to
freeze intermittently. If the picture disappears completely, this could mean that
signal condition is very poor. If this happens often, you may need to improve your
aerial system to provide a better signal.
Green bar Good
Red bar Poor (check the aerial)
DVB Tuning Menu (DVB mode)
condition
New DVB Service Found!
Press OK to start Auto Setup
Press EXIT ti ignore
W arning Selecting Auto Setup will delete
current Profile and Childlock settings
MENU
EXIT
DVB Auto Setup
Add New Service
New Service
Message
Signal
Condition
To Next Page
Loading...
