39
Q-- Link allows the televi sion to communicate with a compatible VCR or DVD Recorder.
For Q-- Link communication to work, the TV must be connected to a recording device with the “Q -- Link”, “NE XTV I E WLI N K ”, “DATA
LOGIC ”, “Easy L ink ”, “Meg alogic” or “SM A R TLI N K ” logo using a “fully w ired” S cart cable between the AV 2 socket of the telev ision
and the appr opr ia te socket on you r VCR , and the AV 1 socket of th e telev i sion and th e app rop ria te socket on your DV D R ecord e r.
For connection to the appropriate Scart socket on the recording device, refer to the device’s operating instruction book.
When using a “NEXTVIEWLINK” device the main features possible are the following :
Preset Download
This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct recordings are
made; there are several ways to perform this operation :
1. During installation as explained in the ’Quick Start Guide’ beginning on page 7.
2. When Auto setup is started from within the Tuning menu, see page 21.
3. Preset download started from the recording device, refer to the device’s operating instruction book.
Because a recording device cannot tune to DVB stations, only the analogue programme positions are downloaded to the device.
Important Note:
Not all recording devices support this type of data communication system. Some may support certain features, but not others. Refer to the
recording device’s operating instruction book.
If Q-- Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.
What You See Is What You Record (DIRECT TV RECORDING) (Not available with HDMI)
This will allow the immediate recording of the programme currently shown on the television, by the recording
device attached to the Scart socket, which can be chosen using “Q --- Link select”. (see page13).
Press the DIRECT TV REC button on the remote control.
If the recording device is in Standby mode with usable recording media inserted, it will automatically switch
on when you press the DIRECT TV REC button.
If a “Q-- Link” device is connected, a message will appear on the TV screen showing what is being recorded, or if it is not possible to
record. Some “Q-- Link” compatible devices will only display the message when on the VCR programme position(0) or in AV mode. Refer
to the device’s operating instruction book.
Recording in progress
The recording device is recording the programme signal
fromitsowntuner.IfyouwishyoucanswitchofftheTV
and leave the device recording in the normal way.
No recording -- Check tape or disc
The tape or disc may have been “write protected”, missing
or may be damaged. The device may already be recording.
Refer to the device’s operating instruction book.
Recording DVB stations
If you press the DIRECT TV REC button while watching a DVB station, the recording device will automatically switch to its AV input to
record the DVB signal from the TV (via the SCART cable), and the DVB programme position will be locked. If you attempt to select
another DVB programme position while recording, you will see the message “DVB programme is locked”. Press the OK button to clear
the message, or the EXIT button to unlock the programme. Beware that if you press EXIT, the DVB programme will be unlocked ---
switching to another DVB programm e w ill spoil your intended recording.
Additionally, when using a “Q-- Link” device the main features possib le are the following :
The following features are only available from the device connected to the scart socket selected using “Q ---Link select“. (see page 13).
TV / Recording device Auto Power On
If you insert pre ---recorded media into the recording device and press the Play button whilst the TV is in ’Standby’ mode, the TV will
automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
When the TV is switched into ’Standby’ mode, the recording device will also switch into ’Standby’ mode if there is no media inserted, or
if there is media inserted and the device is in ’Rewind’ or ’Stop’ mode. If a VCR is rewinding a tape, it will not switch into ’Standby’ mode
until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g. Main menu), the TV will
automatically switch On and the menu will be displayed.
Some other devices may support this feature. Refer to the device’ s operating instruction book.
This TV will also communicate with other recording device’s that carry the following logos :
D “DATA LOGIC” (a trademark of Metz Corpo ration). D “Easy Link” (a trademark of Philips Corporatio n).
D “Megalogic” (a trademark of Grundig Corpo ration). D “SMARTLINK” (a trademark of Sony Corporation).
Important Note:
These recording devices may support some or all of the above functions. Refer to the device’s operating instruction book.
Not all recording devices support this type of data communication system. Some may support certain features, but not others. Refer to the
device’s operating instruction book. Some features are only available from the device connected to the scart socket selected using
“Q ---Link select“. (see page13).
If Q-- Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.
Q-- LINK
To Next Page
Loading...
