Snowy
Picture
Noisy
Sound
Aerial location, direction or connection.
Multiple
Images
Normal
Sound
Aerial location, direction or connection
Interference
Noisy
Sound
Electrical appliances
Cars / Motorcycles
Switch on P--- NR in Picture menu to reduce picture
noise
Normal
Picture
No Sound
V o lume level
Sound mute switched on
No Picture No Sound
TV set to AV mode
Not plugged into A.C. outlet
Not switched on
Picture / Sound controls set at minimum levels
Check if in standby mode
No Colour
Normal
Sound
Colour controls set at minimum levels
Poor or
Distorted
Picture
Weak or
No Sound
Retune Channel(s)
There may
be red spots,
blue spots
and green
spots on the
screen.
Normal
Sound
This is a charact eristic of liquid crystal panels and is not
a problem. The liquid crystal panel is built with very
high precision technolo gy giving you fine picture
details. Occasionally , a few non ---active pixels may
appear on the screen as a fixed point of blue, green, or
red. Please note this does not affect the performance of
your LCD.
Normal
Picture
Weak or
distorted
sound
Sound reception may have deteriorated.
Switch NICAM setting (Sound menu) to Off until
reception improves.
Poor Video
(Snow noise, no picture, picture runs etc)
HDMI cable is not connected securely.Turn the power
supply of the TV and connected equipment off then
turn back on. Check compatibility of input signal from
the
connected equipment. The connected equipment
must be EIA/CEA --- 861/861B compliant
Poor Audio
Change the audio setting of the connected equipment
to L PCM. Check the setting of HDMI input in Sound
menu. If the problem is due to the digital audio con-
nection, change to the analogue audio connection
The error message appears Please consult an Authorised dealer
TROUBLESHOOTING
To Next Page
Loading...
