English
8
2
A
A
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Put the screen protective cushion onto a work table.
2 Put the clean and soft cloth on the screen protective
cushion.
3 Put the TV onto the work table with the screen panel
down.
4 Remove the assembly screws
from the TV.
5 Pull out the pedestal from the TV.
Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
for connection.
●
Use a fully wired HDMI compliant cable.
●
Use a fully wired SCART cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
4
5
1
2
3
8 9 10
6
11
7
1 CI slot (p. 11)
2 SD Card slot
3 Headphone jack
(p. 11)
4 USB 1 - 3 port
5 HDMI3
6 AV1 (SCART)
(p. 9)
7 AV2 (COMPONENT / VIDEO)
(p. 10)
8 ETHERNET
(p. 10)
To Next Page
Loading...
