EasyManua.ls Logo

Panasonic Viera TX-L24C3E

Panasonic Viera TX-L24C3E
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Use Menu Functions
31
Menu
Item Adjustments / Configurations (alternatives)
Setup
DVB-C Tuning Menu
Favourites Edit Creates list of favourite DVB-C channels (p.36)
Channel List Skips the unwanted DVB-C channels or edits DVB-C channels (p.37)
Auto Setup Automatically sets the DVB-C channels supplied (p.34)
Manual Tuning Sets the DVB-C channels manually (p.38)
Update Channel List Updates DVB-C Channel List while keeping your settings (p.38)
Favourite Network Selects your favourite network for each broadcasters (only available in some countries)
New Channel
Message
Selects whether to give a notification message when a new DVB-C channel is found
[Off] / [On] (p.38)
Service Replacement
Set to [On] to enable a message to switch to the available service (only available in
some countries) [Off] / [On]
Signal Condition Checks the DVB-C signal condition (p.38)
Attenuator Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] (p.38)
Add TV Signal
Adds the TV mode
t
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
t
To operate, refer to the Auto Setup operations for first using the TV (p.12,13).
DVB-T Tuning Menu
Favourites Edit Creates list of favourite DVB-T channels (p.36)
Channel List Skips the unwanted DVB-T channels or edits DVB-T channels (p.37)
Auto Setup Automatically sets the DVB-T channels received in the area (p.35)
Manual Tuning Sets the DVB-T channels manually (p.38)
Update Channel List Updates DVB-T Channel List while keeping your settings (p.38)
Favourite Network Selects your favourite network for each broadcasters (only available in some countries)
New Channel
Message
Selects whether to give a notification message when a new DVB-T channel is found
[Off] / [On] (p.38)
Signal Condition Checks the DVB-T signal condition (p.38)
Add TV Signal
Adds the TV mode
t
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
t
To operate, refer to the Auto Setup operations for first using the TV (p.12,13).

Related product manuals