How to Use Menu Functions
32
Menu
Item Adjustments / Configurations (alternatives)
Sound
PCM Optical Level
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT terminal as the
initial setting [-12] / [-10] / [-8] / [-6] / [-4] / [-2] / [0] (dB)
Normally, PCM sound is higher compared with the other types of audio track.
DVB mode only
HDMI1 / 2 Input
Select to fit the input signal [Digital] / [Analogue] (p. 73)
[Digital] : When sound is carried via the HDMI cable connection
[Analogue] : When sound is not carried via the HDMI cable connection
HDMI input mode only
Audio Description Menu
Audio Description
Narration settings for visually impaired users [Off] / [Auto]
Set to [Auto] to activate the narration sound track when available on the
broadcast
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 17).
DVB mode only
Volume
Adjusts the volume for Audio Description
DVB mode only
Speakers
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
DVB mode only
Headphones
Set to [On] to activate the description sound track from headphones [Off] / [On]
DVB mode only
Reset to Defaults
Press the OK button to reset the present Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Setup
Timer Programming
Sets programme reminders and records forthcoming programmes (p. 43)
TV Guide Settings
TV Guide View
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal] : Default TV Guide screen
[Full] : Displays channels and programmes full-screen without the operation
guide
[Info] : Displays details of the selected programme at the bottom without the
operation guide
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 18)
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
If you press the OK button, the following items are set as below:
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby]
[2 hours]
Link Settings
VIERA Link Settings for VIERA Link functions [Off] / [On] (p. 63)
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
Component and HDMI signals cannot be output.
To Next Page
Loading...
