Retuning from Setup Menu
38
Retuning from Setup Menu
Automatically retune the channels received in the area.
This function is available if channel tuning is already performed.
Only the selected mode is retuned. All the previous tuning settings are erased.
If Child Lock PIN number (p. 45) has been set, the PIN number is required.
If tuning has not been done completely [Manual Tuning] (p. 39, 42)
DVB or Analogue channels
1
Select the mode
(p. 16)
TV
2
Display the menu and select [Setup]
Main Menu
Picture
Sound
Setup
select
access
3
Select [DVB Tuning Menu] or [Analogue Tuning Menu]
Setup Menu
AccessDVB Tuning Menu
AccessAnalogue Tuning Menu
select
access
The displayed item depends on the selected mode.
4
Select [Auto Setup]
Example:
DVB Tuning Menu
Auto Setup Access
select
access
5
Start Auto Setup (Settings are made automatically)
Example: DVB
All DVB tuning data will be erased
DVB Auto Setup
DVB Auto Setup
This will take about 3 minutes.
Progress CH 21 68
62
CH Channel Name Type Quality
CBBC Channel Free TV 10
62 BBC Radio Wales Free TV 10
62 E4 Free TV 10
62 Cartoon Nwk Free TV 10
Free TV: 4 Pay TV: 0 Radio: 0 Data: 0
Searching
Example: Analogue
All analogue tuning data will be erased
Analogue Auto Setup
Analogue Auto Setup
29
CH Channel Name
30
Analogue: 2
Searching
This will take about 3 minutes.
Scan CH 21 68
The analogue settings are downloaded to a Q-Link compatible equipment connected to the TV in Analogue mode.
When the operation is completed, the channel at the lowest position will be displayed.
Auto setup using the buttons on the TV
For Auto Setup, using the buttons on the TV (p. 10)
1 Press the F button repeatedly
until [Auto Setup] appears
2 Access [Auto Setup] 3 Start [Auto Setup]
F
TV
TV
Control panel OSD appears when pressing the control panel button.
To return to TV
F
To Next Page
Loading...
