Using Media Player
53
Starting Media Player
1
Insert the SD Card or USB Flash Memory to the TV
(p. 52)
2
Confirm the message and start Media Player
You can also start by pressing the following button.
AV
“Watching External Inputs” (p. 26)
3
Select the device to access
2/2
Drive Select
SD Card
EXIT
Select
RETURN
Access
Selected device name
select
access
If only one device is connected, this step will be skipped.
4
Select the content
Photo Video Music
Contents Select
SD Card
EXIT
Select
RETURN
Access
access
select
[Photo] (p. 54)
[Video] (p. 57)
[Music]
(p. 59)
5
Enjoy Media Player
Example: Thumbnail - [All photos]
EXIT
Select
RETURN
Slideshow View Select Drive Select Contents Select
Info
View
Option Menu
SD Card
Media Player Photo All photos
Selected device name
To display the information of the highlighted content
1/48
p1010001.JPG
23/10/2011
1600X1200
File name
Date
Size
File number / Total file number
Note
You can also access each mode directly by using VIERA TOOLS. (p. 28)
Select the appropriate device and content for playing back each file.
You can use the following buttons during playback. Set the code of the remote control to “73” (p. 27).
Change the device
You can change to the other device directly in the same mode if two or more devices are connected.
1 While the thumbnail is displayed,
display the device selection
(yellow)
2 Select the device to access
2/2
Drive Select
SD Card
EXIT
Select
RETURN
Access
Selected device name
access
select
Change the contents
You can switch to the other mode of Media Player from the thumbnail view.
The mode can be switched in the current device.
1 While the thumbnail is displayed,
display the contents selection
(blue)
2 Select the contents
Photo
Video Music
Contents Select
SD Card
EXIT
Select
RETURN
Access
select
access
To Next Page
Loading...
