Input Labels/Monitor Out
Display menu and select "Setup"!f_ _ @ne×t
// F
d)se ect
Select "External devices"
• Press to exit from
a menu screen
EXIT
@
Select "Input labels" or "Monitor out"
Devices connected to external input terminals can be labeled for easier identification during
input selection. (In selecting input mode from p. 20 @)
• Select the terminal and label of the external equipment
Label Terminal
[example]
@
-1
-1
_o
=o
0
-i
® Terminals: Comp. 1-2/HDMI 1-3/Video 1-2
® Label: SKIP*/VCR/DVD/CABLE/DBS/PVR/GAME/AUXI
RECEIVER/[BLANK]
* If "SKIP" is selected, the TV/VIDEO button press will skip its input.
® Each selected labels will be displayed on "Input select" screen.
(R 20)
To prevent howling and image oscillation, stops output of the pictures and audio specified in
this menu. (p. 25)
• Select the terminal and set "Off"
® Select "Off' to stop output of picture and
audio. (Video l/Video 2)
® Component l/Component 2/HDMI I/HDMI
2/HDMI 3 cannot output video signals
regardless of "Monitor out" setting.
When equipment (STB, DVD, etc.) is
connected to HDMI or COMPONENT
terminals, no video signals can be passed
through PROG OUT terminal.
35
To Next Page
Loading...
