Recommended AV Connections
These diagrams show our recommendations on how to connect the TV unit to your various equipment.
For other connections, consult the instructions for each piece of equipment and its specifications.
For additional assistance, please visit our website at: www.panasonic.com
www.panasonic.ca
Front of the TV
CableBoxJo_
Back of the TV
AC 120 V
60 Hz
AC Cord
(Connect after
all the other
connections are
complete.)
• To watch camcorder
images
Camcorder
VCR
DVD Player
(For HDMI connection,
HDMI compatible
equipment only.
For connection using
HDMI-DVI Conversion
cable, see HDMI 1 or
HDMI 2 connection on
this page.)
mmmmmmm
....... ..................................................................................or _
• DVD Recorder /
VCR
J
I
t
Optical digital
Amplifier audio cable
• To listen to the OPTICAL IN
TV through
speakers _A_ HDMI cable--
=t
|
....... , _ ,_B_,HDMI-DVt
. _Conversion cable
_/ + Audio cable*
or
@
;;U
O
0
(D
Q.
@<>
Co°
00
3o
• To watch DVDs
DVD Player/Set
® The picture and audio input signals connected to a ®
terminal specified in "Monitor out" (p. 35) cannot be
output from "PROG OUT" terminals.
However, audio output can be obtained from "DIGITAL ÷
AUDIO OUT" terminal.
® To prevent howling and image oscillation, set the
"Monitor out" setting when connecting the VCR with *
loop-connection. (p. 24, 35)
Top Box
When equipment (STB, DVD, etc.) is connected to
HDMI or COMPONENT terminals, no video signals can
be passed through PROG OUT terminal.
When receiving digital channel signals, all digital
formats are down-converted to composite NTSC video
to be output through the PROG OUT terminals.
Please see p. 22-23 for setup when using an external
analog audio cable with an HDMI to DVI cable.
37
To Next Page
Loading...
