Why does my Panasonic WH-MDF06D3E5 Heat Pump show IPM (power transistor) overheating protection?
If your Panasonic Heat Pump is experiencing IPM (power transistor) overheating protection, check for improper heat exchange and inspect the IPM (Power transistor).
What to do for outdoor discharge pipe temperature sensor abnormality in Panasonic WH-MDF06D3E5 Heat Pump?
If your Panasonic Heat Pump is showing an outdoor discharge pipe temperature sensor abnormality, you should check the outdoor discharge pipe temperature sensor.
How do I troubleshoot an outdoor fan motor lock abnormality on my Panasonic WH-MDF06D3E5 Heat Pump?
If your Panasonic Heat Pump displays an outdoor fan motor lock abnormality, check the outdoor PCB and the outdoor fan motor.
What to do if my Panasonic Heat Pump has a refrigeration cycle abnormality?
If your Panasonic Heat Pump has a refrigeration cycle abnormality, check for insufficient refrigerant, the outdoor PCB, and whether the compressor has low compression.
What to check if my Panasonic Heat Pump shows indoor heat exchanger freeze prevention?
If your Panasonic Heat Pump is showing indoor heat exchanger freeze prevention, check the indoor heat exchanger and ensure there is no refrigerant shortage.
What causes total running current protection in a Panasonic Heat Pump?
If your Panasonic Heat Pump is experiencing total running current protection, it may be due to excess refrigerant. You should check the outdoor PCB.
Why my Panasonic Heat Pump system cannot get warm instantly?
Due to the nature of the heatpump system, it may take some time to heat-up the water if the unit is operated from cold-start.
General| Heating Capacity | 6.0 kW |
|---|---|
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R32 |
| Type | Air to Water Heat Pump |
| Power Supply | 230V / 50Hz |
| Operating Temperature Range (Heating) | -15 to +24 °C |
| Operating Temperature Range (Cooling) | +10 to +43 °C |
To Next Page
