Panasonic WH-SXC16H9E8 User Manual (English)

Other manuals for Panasonic WH-SXC16H9E8

Questions and Answers:

C
christian45Aug 17, 2025
Why is my Panasonic WH-SXC16H9E8 Heat Pump system hard to heat up?
- D
  Deborah HollandAug 17, 2025
  Your Panasonic Heat Pump system may take longer to heat up if the panel and floor are heated simultaneously, which can decrease the warm water temperature and reduce heating ability. Also, low outdoor air temperature or a low preset water outlet temperature can extend the heating time. Check if the discharge outlet or intake inlet in the outdoor unit is blocked by obstacles like snow.
B
brandysimsAug 20, 2025
Why does my Panasonic Heat Pump system not heat up instantly?
- D
  Daniel MorseAug 20, 2025
  If the system starts operating at a cold water temperature, it will take some time to heat up the water.
C
Craig SpencerAug 22, 2025
Why does steam come out of the outdoor Panasonic WH-SXC16H9E8 unit in heating mode?
- R
  Richard ChavezAug 23, 2025
  The steam is a result of the defrost operation in the heat exchanger.
M
Michael MeadowsAug 26, 2025
Why does my Panasonic WH-SXC16H9E8 backup heater automatically turn on when it is disabled?
- B
  Brandon YoungAug 26, 2025
  The backup heater may turn on automatically due to the protection control of the indoor unit heat exchanger.
J
Jonathan BakerAug 28, 2025
Why does my Panasonic WH-SXC16H9E8 outdoor unit emit water or steam?
- B
  bowmantaylorAug 28, 2025
  The emission of water or steam from the outdoor unit is due to condensation or evaporation occurring in the pipes.
P
Penny CarrAug 30, 2025
Why does the Panasonic WH-SXC16H9E8 make a loud refrigerant noise for several minutes?
- W
  Walter DayAug 31, 2025
  The loud refrigerant noise is caused by protection control during deice operation when the outdoor ambient temperature is lower than -10 °C.
S
stevenandersonSep 2, 2025
What causes the water flowing sound during Panasonic WH-SXC16H9E8 Heat Pump operation?
- L
  Lauren DuranSep 2, 2025
  The water flowing sound is due to refrigerant flow inside the unit.
S
Sally GoodmanSep 5, 2025
Why does my Panasonic WH-SXC16H9E8 Heat Pump outdoor unit not operate?
- M
  Mark WillisSep 5, 2025
  The outdoor unit may not operate due to the system's protection control when the outdoor temperature is outside of the operating range.
S
Shawna JonesSep 8, 2025
Why does my Panasonic WH-SXC16H9E8 Heat Pump operation start automatically when the timer is not set?
- K
  katherineporterSep 8, 2025
  The operation may start automatically because the sterilization timer has been set.
T
Terrence SanchezSep 12, 2025
Why is the Panasonic Heat Pump COOL mode unavailable?
- B
  Brandon WhiteSep 12, 2025
  COOL mode is unavailable because the system has locked to operate in HEAT mode only.

Panasonic WH-SXC16H9E8 Specifications

General

Heating Capacity	16 kW
Energy Efficiency Class (Heating)	A+++
Refrigerant	R32
Dimensions (Indoor Unit)	892 x 500 x 340 mm
Dimensions (Outdoor Unit)	1340 x 900 x 320 mm
Type	Air to Water
Cooling Capacity	14.0 kW