Why does my Panasonic WH-UX12FE5 Heat Pump operation start automatically when the timer is not set?
Automatic operation without a timer setting indicates that the sterilisation timer has been set.
Why does steam come out of the outdoor unit of my Panasonic Heat Pump in heating mode?
The steam is caused by the defrost operation in the heat exchanger.
What does it mean when the HEAT indicator blinks on the display of my Panasonic WH-UX12FE5 Heat Pump?
A blinking HEAT indicator means the system is performing a deice operation.
Why does my Panasonic Heat Pump make a loud refrigerant noise for a few minutes?
The loud refrigerant noise is caused by protection control during deice operation when the outdoor ambient temperature is lower than -10°C.
Why does my Panasonic WH-UX12FE5 outdoor unit emit water or steam?
The emission of water or steam from the outdoor unit is due to condensation or evaporation occurring in the pipes.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 3 Phase, 380-415V, 50Hz |
| Refrigerant | R32 |
| Nominal Heating Capacity | 4.0 kW |
| Nominal Cooling Capacity | 3.5 kW |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Type | Split |
To Next Page
