To Next PageTo Next PageWhy is my Panasonic WH-UXZ09KE8 Heat Pump so noisy?
If the Panasonic Heat Pump is noisy during operation, it might be due to the outdoor or indoor unit being installed at an incline. Ensure the units are level. Also, make sure the cover is properly closed.
What does it mean if *1, *2 COOL mode is unavailable on my Panasonic Heat Pump?
If *1, *2 COOL mode is unavailable on your Panasonic Heat Pump, the system has been locked to operate in HEAT mode only.
Why is there loud refrigerant noise for several minutes in my Panasonic WH-UXZ09KE8 Heat Pump?
The loud refrigerant noise in your Panasonic Heat Pump is caused by protection control during de-ice operation when the outdoor ambient temperature is lower than -10 °C.
Describes the components of the Air-to-Water Heatpump system.
Details the temperature ranges for heating and cooling operations.
Covers symbols, user age, unit handling, power supply, and electrical safety warnings.
Focuses on R32 refrigerant precautions, installation space, and ventilation.
Details safety during servicing, repairs, leak detection, evacuation, charging, and recovery.
Explains controller buttons, display, and navigation.
Guides through language selection, clock/date setup, and initial checks.
Describes access and options like Force DHW, Powerful, Quiet, Force Heater.
Covers user function setup (timers), system check, and personal setup.
Details installer setup for system, operation, service, and remote controls.
Covers cleaning procedures, regular checks, and tips for non-use.
Lists symptoms, causes, checks, and error codes.
General