15
Installing the camera directly on a wall or ceiling
Affix the installation template label (accessory) to the ceiling or wall, and use a pen to mark the
positions of the screws and cable mounting hole in the ceiling or wall.
Remove the installation template label, and attach the camera with 2 screws (M4, locally procured).
Connections
Connect the video output
Important:
• Be sure to turn off the power of each
device before connecting.
• Be sure to secure the coaxial cable
connectors.
Connect a coaxial cable (locally procured) to
the video output connector.
Connect the power supply
Connect the two-color conductor cable of the
camera to the power supply. The colors and
functions of the conductors are shown below.
Color
12 V DC 24 V AC
Brown
Positive Live
Blue
Negative Neutral
Power cord
Video output
connector
29 mm
83.5 mm
21 mm
Recommended screw
(M4, 2 pcs.)
Screws (M4, locally procured)
Side cable
access hole
in ceiling or wall
Installation template
label (accessory)
To Next Page
Loading...
