Panasonic WV-CL930 - Page 10

10
q Side cover
When the external synchronization switch
or operation buttons are used, the side
cover is slid leftward to the lock position.
w ALC lens connector
The ALC connector is connected to this
ALC lens connector. If the connector
shape is a different type, replace the
connector with the ALC connector
(accessory).
e Tripod socket
This socket is used to mount the camera
mounting base (option). The tripod sock-
et can be mounted on either top or bot-
tom of the camera head.
(Tripod socket hole: 1/4-20 UNC for tri-
pod)
r External synchronization switch
(☞ page 18)
t Operation buttons
This buttons are used to perform various
settings in the setup menu.
J: Up button (UP)
K: Down button (DOWN)
L: Left button (LEFT), NEAR
M: Right button (RIGHT), FAR
I: Setting button (SET), ABF/MENU
y External synchronization input con-
nector
(☞ page 14)
u Video output connector
The video output cable is connected to
this video output connector.
i Power indicator
This indicator lights up when the power is
on.
o External terminal
(☞ page 18)
!0 Power connector (only for WV-CL930)
The included power cord is connected to
this power connector.
!1 Signal ground terminal
(only for WV-CL934)
The ground wire is connected to this ter-
minal.
!2 AC/DC power terminal
(only for WV-CL934)
The power supply of 24 V AC or 12 V DC
is connected to this terminal.