22
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Notes:
• If the top screen of the setup menu is
called up while a camera image is dis-
played, the setup mode is always "DIS-
ABLE" to prevent operation errors. To
perform settings in the setup menu,
change the setup mode to "ENABLE".
• The cursor is a reversely highlighted
part.
Step 4
Perform the settings for each item.
• Selection of setting item:
Press the up button or down button to
move the cursor.
• Change of settings:
Press the right button or left button.
• Display of advanced setup screen:
Press the setting button when "O" is
attached to the target setting item.
• Return to previous setup screen:
Move the cursor to "RET" and press the
setting button.
• Return to top screen:
Move the cursor to "TOP" and press the
setting button.
Step5
To return to the camera image screen, move
the cursor to "END" and press the setting but-
ton.
To Next Page
Loading...
