24
<Character entry>
• To revise a character, move the cursor to
the arrow (↑) in the editing area, move
the cursor (↑) to the character to be
revised with use of the right and left but-
tons, and enter a correct character.
• To enter a blank, move the cursor to
"SPACE" and press the setting button.
• To delete all the entered characters,
move the cursor to "RESET" and press
the setting button.
Step 3
Move the cursor to "POSI" and press the set-
ting button after title entry.
→ The display positioning screen appears.
Step 4
Use the up, down, right, and left buttons to
decide the title position and press the setting
button.
→ The camera title and title position are
specified.
To Next Page
Loading...
