Panasonic WV-CL930 - Page 26

26
PRESET mode setting
Step 1
Move the cursor to "ALC", "ALC+", or "ELC" of
"ALC/ELC" and press the setting button.
→ The "ALC CONT", "ALC+CONT" or "ELC
CONT" screen appears.
Step 2
Move the cursor to "PRESET" and use the
right or left button to select "ON" or "OFF".
ON: Automatically performs backlight com-
pensation.
OFF: Performs backlight compensation after
specifying the compensation area.
When "OFF" is selected, "MASK SET"
appears on the "ALC CONT", "ALC+
CONT" or "ELC CONT" screen. (☞ page
27)
Step 3
To change the video output level (image con-
trast), move the cursor to "LEVEL" and adjust
the level with use of the right or left button.
**CAMERA SETUP** 1/2
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
**ELC CONT**
BACK LIGHT COMP
PRESET ON
PEAK MODE OFF
LEVEL
...
|
...128
- +
RET TOP END
**ALC CONT**
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL
...
|
...128
- +
RET TOP END
"CAMERA SETUP" screen
"ALC CONT" screen
"ELC CONT" screen
**ALC+CONT**
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL
...
|
...128
- +
RET TOP END
"ALC+CONT" screen