Installation and connection
1 Rotate the lens (option) clockwise slowly to mount the lens.
Important:
• CS-mount lens can be used on this camera. For use of C-mount lens, use the C-mount
adaptor (option).
• For prevention of damage to the camera body, use a lens with protrusion of 5.5 mm or less
from the flange surface.
Protrusion from mount:
φ20 mm {25/32 inches} or less
Protrusion from flange:
5.5 mm {7/32 inches} or less
Optional dedicated lens
Lens type Model No.
ALC lens for
1/3-type CCD cameras 2x vari-focal
WV-LZA61/2S
WV-LZA62/2
8x vari-focal
WV-LZ62/8S
2 Connect the lens cable to the ALC lens connector of the camera.
Important:
• Follow the installation and connection procedure below to ensure safety.
Pin No.
1 Dump
2 Dump
3 Drive
4 Drive
PGQX1142YA_WV-CP300_G.indd 13 2012/3/30 16:53:34
To Next Page
Loading...
