Panasonic WV-CP310

28
Reference page
Cause/solution
Troubleshooting
Beforeaskingforrepairs,confirmthecauseswiththefollowingtable.
Contactyourdealerifaproblemcannotbesolvedevenaftercheckingandtryingthesolutioninthe
table or a problem is not described below.
Symptom
Blurredimage
Thetemperatureofpower
cordrisesorfallswhenthe
power cord is bent or
stretchedduringuse
Damagedpowercord
sheathing
Heatedportionofpowerline
consistingofpowercord,
connector,andpowerplug
duringuse
Noimagedisplayed
•Arethepowercordandcoaxialcable
connected appropriately?
→ Checkwhethertheconnectionis
appropriately established.
19~20
• Isthemonitorbrightnessappropriately
adjusted, or is the contrast appropriately
adjusted?
→ Checkwhetherthemonitorsettings
are appropriate.
-
•Isthelensofthecamerasoiledwithdirt
or dust?
→ Checkwhetherthelensofthe
camera is clean.
-
•The power cord, power connector, or
power plug is damaged. Continuous
use of the damaged cord, connector,
or plug may cause electric shock or
fire.
 Disconnectthepowerplugimmediately
andrequestrepairfromyourdealer.
-
•Isthefocusadjustedcorrectly?
→ Checkifthefocusisadjusted
correctly.
21~22
•Isthelenscapdetached?
→ Checkwhetherthelenscapisremoved.
-
PGQX1142YA_WV-CP300_G.indd 28 2012/4/2 14:11:04