Important:
• If the view angle changes during adjustment, press the [SET] button to close the "FOCUS
ADJUSTMENT" screen (once the view angle changes, the "PEAK HOLD" and "INDICATOR"
values will also change), and repeat from step 3 after the view angle is fixed.
• When shooting in the following place or following subjects, press the [SET] button again to
close the "FOCUS ADJUSTMENT" screen. Adjust to the best focus position while viewing the
image.
• Frequently moving subject
• Subject with large illuminance change
• Subject with low illuminance
• Too bright or reflective subject
• Subject through a window
• Place where the lens easily becomes dirty
• Subject with less contrast such as white wall
• Subject with remarkable depth
• Subject with heavy flicker
• Subject with horizontally parallel lines such as a shutter
To Next Page
Loading...
