12
Back light compensation function
Follow the procedure below.
Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button.
→
The “ALC CONT” screen appears.
Note:
Step 2
ON:
OFF (default):
Step 3
ON: Uses ABS.
OFF (default): Does not use ABS.
Note:
Step 4
Move the cursor to “MASK SET” and press the [SET] button.
→
Step 5
Press the [UP], [], [RIGHT], and [LEFT
button.
Note:
“ALC CONT” screen Mask setting screen“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
ABS
MASK SET
- +
LEVEL .I..... 0
RET TOP END
BLC
OFF
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO1
VMD OFF
RET TOP END
D&N(IR)
To Next Page
Loading...
