-20-
See the pages below for the settings respectively.
Shutter speed: page 34
AGC: page 34
Electronic sensitivity enhancement: page 34
White balance: page 36
Motion detector: page 37
Auto focus: page 38
● Preset Speed Setting (PRESET
SPEED)
Move the cursor to PRESET SPEED and select a speed
with the joystick.
● To Return to the Preset Number Set
Menu
Move the cursor to RET and press the CAM (SET) key.
The PRESET NUMBER SET menu appears with the *
mark on the right of the preset position number.
● To Return to the Setup Menu
Move the cursor to RET and press the CAM (SET) key.
■ Deleting Preset Positions
1. Move the cursor to PRESET 1 and select the posi-
tion number to be deleted with the joystick.
2. Press the CAM (SET) key to display the preset set-
ting menu.
3. Move the cursor to DEL and press the CAM (SET)
key.
This deletes the preset position and the PRESET
NUMBER SET menu appears. The * mark on the
right of the number disappears.
Note: Your selected preset number is cancelled
only in the SEQ and SORT mode. The previously
set parameters (for PAN, TILT positions, etc.)
are not changed. If you want to change these
parameters, you must set them again.