Why can't I communicate with personnel or customers on my Panasonic Conference System?
If you cannot communicate with other store personnel or the customer using your Panasonic Conference System, first, check if the Center Module is turned on. If the issue persists, the headset ID might not be registered. Register the ID in the Center Module.
What to do if my Panasonic WX-CT420 Conference System Belt Pack won't turn on?
If you cannot turn on the Panasonic Conference System Belt Pack, the battery may be exhausted or not inserted correctly. Try replacing the battery with a charged one and ensure it is properly positioned.
What to do if I can't hear customers on my Panasonic WX-CT420 Conference System?
If you cannot hear or talk to the customer, but communications with the store personnel are OK on your Panasonic Conference System, the vehicle detector may be malfunctioning. Check that the vehicle detector is plugged in and has power. If the problem persists, consult your dealer for repairs.
Why is the power indicator light red on my Panasonic WX-CT420?
If the power indicator on your Panasonic Conference System is lighting red, the battery is almost exhausted. Replace the battery with a charged one.
General| Connectivity | Wired |
|---|---|
| Microphone | Electret Condenser |
| Output Level | -38 dB (1V/Pa at 1 kHz) |
| Operating Temperature | 0 °C to +40 °C |
| Operating Humidity | 20% to 90% (non-condensing) |
To Next Page
