Panasonic ZT60 Series - Change 3 D ⇔ 2 D

Watching TV
3D
Change 3D
⇔
2D
Simply switches 3D 2D images (Auto mode)
3D 3D format select
Switch 3D or 2D using / and press
Change 3D format (Manual mode)
1.
Display 3D format select (Manual)
3D format select (Manual)
2.
Select 3D format
3D Cycle through the 3D format
(Original/Side by side (3D)/Side by side (2D)/Top and bottom (3D)/
Top and bottom (2D)/2D 3D)
When the TV receives a 480i/576i signal from the Component or HDMI
terminal, manual adjustment is not available.
Simply switches 3D 2D images (Auto mode)Simply switches 3D 2D images (Auto mode)Simply switches 3D 2D images (Auto mode)Simply switches 3D 2D images (Auto mode)
3D 3D format select 3D 3D format select3D 3D format select3D 3D format select
Switch 3D or 2D using / and press Switch 3D or 2D using / and press 3D3D 2D2D
Change 3D format (Manual mode)Change 3D format (Manual mode)Change 3D format (Manual mode)Change 3D format (Manual mode)
1.
Display 3D format select (Manual)
1.
Display 3D format select (Manual)
1.
Display 3D format select (Manual)3D format select (Manual)
3D format select (Manual) 3D format select (Manual)3D format select (Manual)3D format select (Manual)
2.
Select 3D format
2.
Select 3D format
2.
Select 3D format
3D Cycle through the 3D format 3D Cycle through the 3D format3D3D
(Original/Side by side (3D)/Side by side (2D)/Top and bottom (3D)/
Top and bottom (2D)/2D 3D)
(Original/Side by side (3D)/Side by side (2D)/Top and bottom (3D)/
Top and bottom (2D)/2D 3D)
OriginalOriginal Side by side (3D)Side by side (3D) Side by side (2D)Side by side (2D) Top and bottom (3D)Top and bottom (3D)
Top and bottom (2D)Top and bottom (2D) 2D 3D2D 3D
When the TV receives a 480i/576i signal from the Component or HDMI
terminal, manual adjustment is not available.
When the TV receives a 480i/576i signal from the Component or HDMI
terminal, manual adjustment is not available.
58 (0100804)