Setting Up the Slideshow
You can control all of the Digital Photo Frame functions with the buttons on the top of the frame or with the
remote control. To display the setup screen, simply hold down the Exit button for a second, or press the Setup
button on the remote control.
Card Selection Screen
Use the Card Selection menu to choose between memory cards and the build-in memory.
1. To open the card select menu, either insert a new card, or press the Exit button repeatedly to back
through the screens until you see it.
2. Press the Left and Right arrows to select the desired memory card, or built-in memory.
3. Press Enter to make the selection. The Mode Selection Screen opens.
To Next Page
Loading...
