ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Codes
Meanings
Possible Causes
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
Longer inlet time.
Not reaching required
temperature.
Overflow.
Malfunction of heating element .
Some element of dishwasher leaks .
E1
E3
E4
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
EC
E8
Open circuit or break of distributary valve.
Failure of orientation
of distributary valve.
Ed
PCB or motor fail.
Washing control system
fail.
Open circuit or break wiring for the
communication.
Failure of communication
between main PCB with
display pcb.
A
To Next Page
Loading...
