Panduit MP100 - User Manual

■Front
1
. Impact bumper Protects the printer.
2. button
Turns the printer power ON/OFF.
3. lamp
Indicates the printer's error status.
4. lamp
Indicates the printer battery's remaining
charge (approximate).
5. lamp
Bluetooth indication.
6. Printer cover tab Pull this tab to open the printer cover.
7. Tape outlet Printed labels come out here.
■Rear
8
. Printer cover
Can be opened to insert a tape cartridge,
or for print head cleaning.
9
. Bluetooth
button
Press this button and the button at
the same time to enable/disable
Bluetooth .
1
0
. Power jack Connects the included AC adapter.
1
1
. USB port Connects the included USB cable.
1
2
. Battery cover
Opened when inserting or replacing
batteries.
1
3
. Security anchor
Lets you secure the printer to a desk or
post with a commercial security cable lock
or similar device.
• Insert a label cassette into the printer:
1. Remove any slack in the tape inside the
cassette (if needed)
2. Open the cassette door/printer cover.
3. Place the cassette into the printer as shown.
4. Close the cassette door/printer cover
MP100 PRINTER
Quick Reference Card
Printer Tech Support 1-866-871-4571
GA-TECHSUPPORT@PANDUIT.COM
Rev. 3.8 - 9/2/2020
MP100 Printer and Accessories
Part No. Description
MP100 Includes MP100 printer with protective impact
bumper, 1 cassette of T100X000VPM-BK, USB
cable, and power adapter (MP100-AC). For
use in North America
MP100/E Includes MP100 printer, 1 cassette of
T100X000VPM-BK, USB cable, power adapter
(MP100-AC) and international power cord(s).
For use outside of North America
MP100-ACS Replacement 120-240 VAC universal power
adapter module with power cord for North
America.
MP100-IB Replacement MP100 Impact Bumper
MP100 Label Cassettes
• Continuous label materials:
• Self-laminating Vinyl Tape, Heat Shrink Tubing
• Nylon Cloth Tape, Polyolefin Tape
• Colored Vinyl Tape, Clear Polyester Tape
• Magnetic Tape
Label Cassette Types
Label
Material
Example Part
No.
Typical
Application
Self-Laminating
Vinyl Tape
S000X150VAM Wire/Cable Marking
Heat Shrink
Tubing
H000X044H1M Wire/Cable Marking
Nylon Cloth
Tape
T100X000C1M-BK Wire/Cable Marking
Polyolefin Tape T038X000FJM-BK Terminal Block
Labeling
Colored Vinyl
Tape
T100X000VPM-BK Safety/Facility and
General Identification
Clear Polyester
Tape
T100X000YKC-BK Safety/Facility and
General Identification
Magnetic Tape T100X000MXM-BK Safety/Facility and
General Identification
Getting Started
• Included Items
Compliance Markings
Printer Components and Functions:
Printer Setup
Using batteries:
1. Remove the impact bumper.
2. Open the battery cover at the bottom of the
printer.
3. Insert 6 AA alkaline batteries.
Using the AC Adapter:
1. Connect the included AC adapter to the printer
and plug the power plug into a power outlet.
5
6
7
8
1
2
3
4
Use a pen or a pencil
Pass the end of the
tape through the gap.
MP100 Printer
with impact
bumper
Label Cassette
USB Cable
AC adapter
Documents
CAUTION
Always use AA-size alkaline batteries.
CAUTION
Always use the included AC adapter.

Panduit MP100 Specifications

General

Resolution	203 dpi
Connectivity	USB 2.0
Print Resolution	203 dpi
Power Requirements	100-240 VAC, 50/60 Hz
Print Method	Thermal Transfer
Supported Media Types	Labels
Maximum Print Length	39.37"

Summary

MP100 Printer and Accessories

Printer and Accessories

Details various models of the MP100 printer and their included accessories like power adapters and cables.

Label Cassette Materials

Lists continuous label material types such as vinyl, polyolefin, and magnetic tapes for the printer.

Label Cassette Types

Self-Laminating Vinyl Tape

Specifies part number S000X150VAM for wire/cable marking applications.

Heat Shrink Tubing

Specifies part number H000X044H1M for wire/cable marking applications.

Nylon Cloth Tape

Specifies part number T100X000C1M-BK for wire/cable marking applications.

Polyolefin Tape

Specifies part number T038X000FJM-BK for terminal block labeling.

Colored Vinyl Tape

Specifies part number T100X000VPM-BK for safety/facility identification.

Clear Polyester Tape

Specifies part number T100X000YKC-BK for safety/facility identification.

Magnetic Tape

Specifies part number T100X000MXM-BK for safety/facility identification.

Getting Started

Included Items

Lists and illustrates the components included with the MP100 printer package.

Compliance Markings

Displays various regulatory and certification symbols for the printer.

Printer Setup

Using Batteries for Power

Provides step-by-step instructions for installing and using AA alkaline batteries.

Using the AC Adapter for Power

Details how to connect the AC adapter and power outlet for printer operation.

Inserting a Label Cassette

Step-by-step guide on how to correctly load a label cassette into the MP100 printer.

Front Component Descriptions

Impact Bumper

Protects the printer from impact and damage.

Power Button

Turns the printer power ON/OFF.

Status Lamps

Indicates printer error, battery charge, and Bluetooth status.

Printer Cover Tab and Tape Outlet

Tab to open the printer cover and the outlet for printed labels.

Rear Component Descriptions

Printer Cover

Allows access for tape cartridge insertion or print head cleaning.

Bluetooth and Connectivity Ports

Includes Bluetooth button, power jack, and USB port for connectivity.

Battery Cover and Security Anchor

For battery access and securing the printer with a cable lock.

Connecting Printer to Mobile Device

Bluetooth Connection Setup

Instructions for pairing the MP100 printer with a mobile device via Bluetooth.

Enabling the Bluetooth Function

Steps to enable or disable the printer's Bluetooth feature.

Mobile App Printing

Easy-Mark iLabel App

Details features and usage of the iLabel mobile application.

Easy-Mark Network App

Details features and usage of the Network mobile application.

Easy-Mark iLabel App Features

Text and Voice Input

Supports creating labels with text entry and voice-to-text functionality.

Barcode and QR Code Generation

Allows creation of labels with barcodes and QR codes.

Date;Time Stamp and Label Saving

Features for adding date/time stamps and saving created labels.

Sharing and Font Options

Enables sharing labels online and offers various font sizes.

Easy-Mark Network App Features

Cable Marker and Panel Labeling

Create labels for cables, patch panels, faceplates, and modules.

Text and Voice Input

Supports creating labels with text entry and voice-to-text functionality.

Compliance and LinkWare Integration

Supports ANSI/TIA-606 compliance and connects to Fluke LinkWare™ Live.

Connecting Printer to Computer

Install Printer Driver

Instructions for installing the necessary driver software on a computer.

USB Connection

Steps to connect the printer to a computer using a USB cable.

Bluetooth Connection

Steps to connect the printer to a computer via Bluetooth.

Troubleshooting

Lamp Status Meanings

Explains printer status based on the condition of its indicator lamps.

Printing from Easy-Mark Plus Software

Software Connection and Usage

Guide on connecting the printer via USB and printing using Easy-Mark Plus software.

Additional Support and Resources

Online Resources and Downloads

Information on downloading firmware, product bulletins, and specifications from panduit.com.

Warranty Registration

Instructions for registering the product warranty online.

Related Products

Lists other Panduit products such as label cassettes and the MP300 printer.

Technical Support Contact

Provides phone number and email for Panduit technical support.