To Next PageTo Next PageWhat to do if my Panduit Printer says 'Insert tape'?
If the Panduit Printer displays 'Insert tape', it means that the tape cartridge might not be loaded or set correctly. Ensure the tape cartridge is correctly installed.
How to fix 'Check battery Charge Li-ion!' on Panduit Printer?
If your Panduit Printer displays 'Check battery Charge Li-ion!', it indicates that the battery has run out of power. To resolve this, connect the AC adapter to the printer to charge the battery.
What to do if my Panduit MP200 Printer shows 'Overheated!'?
If your Panduit Printer displays 'Overheated!', it means the printhead is overheated. Turn off the power, remove the tape cartridge, and allow the printer to cool down before using it again.
What to do if Panduit Printer shows 'Check tape cartridge'?
If the Panduit Printer displays 'Check tape cartridge', it means that the loaded tape is not supported. Insert a correct cartridge.
What to do if my Panduit MP200 Printer says 'Check battery Change alkaline'?
If your Panduit Printer displays 'Check battery Change alkaline', it means the batteries have run out. Turn off the power and replace all the old batteries with new ones.
What to do if Panduit MP200 Printer says 'Cover open!'?
If the Panduit Printer displays 'Cover open!', it indicates that the top cover is open. Ensure that you close the top cover.
How to fix 'QR CODE too big!' error on Panduit MP200?
If the Panduit Printer displays 'QR CODE too big!', you can try the following: * Use a wider tape. * Reduce the text or cell size. * Lower "ECC Level".
General| Color | No |
|---|---|
| Printing colors | Black |
| Print technology | - |
| Maximum resolution | 180 x 180 DPI |
| Wire wrap printing | Yes |
| Maximum printing width | 25.4 mm |
| Ribbon width | 24 mm |
| Ribbon length | 7 m |
| Connectivity technology | Wired & Wireless |
| Display | LCD |
| Control type | Buttons |
| Keyboard layout | QWERTY |
| Battery type | Built-in battery |
Weight and Dimensions| Depth | 298 mm |
|---|---|
| Width | 136 mm |
| Height | 90 mm |
Remedies for various error messages displayed on the printer.
Addresses issues like battery charging and tape detection.
Guide for installing and charging the Li-ion battery.
Guide for inputting text and using deletion functions.
Steps for printing labels, including special print functions.
Overview of different label creation modes like Wiremarker, Tape, Wrap.
Options for customizing labels, including barcode, symbol, and text formatting.
How to create repeatable labels for cables, ensuring visibility from all angles.
How to create multiple labels with varying settings efficiently.
Guide to creating wrap-around labels for cables.
How to create flag-style labels for easy cable identification.
Instructions for printing labels with horizontal text orientation.
Instructions for printing labels with vertical text orientation.
How to create multiple mixed-length labels simultaneously.
How to create optimized labels for terminal blocks.
Optimal label creation for patch panels.
Creating labels for 66-blocks for easy connector identification.
Creating labels to identify wires/pins on a 110-block.
Guide to creating barcode labels, including supported types.
Customizing label appearance using layout, style, and spacing options.
Selection of barcode types like EAN-8, CODE128, and their settings.
More barcode type selections like ITF, CODABAR, and their settings.
Contact details for global customer and technical support teams.
